To download our new brochure click on the image below...
3MB Download
General Technical Information
Thermally broken aluminium framed system.
Performance group 'C' to DIN 18055.
The bottom guide track can be supplied with
or without stop and depending upon choice of track can be recessed
into the floor.
I0mm of height tolerance can be taken up
without affecting the soundproofing, draft seal or operation.
The panels are locked in position by means
of aluminium locking bars operating against the top and bottom
tracks. The travel of these bars is 24mm. Polyamide end caps
are fitted to the locking bars to prevent metal on metal contact.
Each panel can be locked in any partly open position
Can be supplied with an integrated separately operable pass
door fitted with proprietary handles, lock and profile cylinder.
Rollers
4 Wheel top hung trolley which are universally
jointed to spread the load evenly or 2 wheel bottom rolling
trolley arranged in such a way that dust or dirt does not effect
performance
The trolleys are scaled heat and cold resistant
glass fibre reinforced Polyamide to ensure very quiet running.
The load bearing capacity is 160kg for bottom
rolling and 200 kg for top hung
Glazing
Glass unit thickness up to 30mm is possible
The glazing method is in accordance with the
general code of practice for glazing
Replacement of the glazing at a later date
is possible without problems
Technical Data
The construction is flush with the surface
therefore there are no protruding running or directional tracks
Can be opened to the inside or outside and
is available with a separate or attached turning panel (through
180°).
The profiles have a very narrow visible projection
width allowing a very large percentage of glazed surface
The panel is 50min thick allowing a maximum
panel width of 1000mm.
Up to 10mm expansion compensation that is
made possible due to wide closing rebates meaning that the
screen remains impenetrable and continues to function correctly
under hot and cold conditions.
Vertical sealing is by means of a double
EPDM seal. Horizontal sealing is by means of a brush seal with
a PVC web on the outside and an EPDM seal on the inside
Concealed glass rebate drainage below resulting
in a reduction of pressure therefore safe drainage is guaranteed
(no drainage slits in the visible surface). This design corresponds
to the glass manufacturers regulations. The ground sill has
a large drainage antechamber for a controlled dripping of water
outwards with no visible drainage holes
Planning Guide
System
Thermally broken profile system
Unit thickness of 50mm
Performance Group 'C'
Bottom rolling as standard, top
hung recommended for balcony units
Panels
Choose the number of panels.
Panel sizes are dependant on the type of glass and their
width and height. If necessary, the number of panels
must be increased.
Choose colour powder coated to RAL or anodised to Euras
Frame
Decide on the external frame dimensions in relation
to to the structural opening, making provision for any
necessary installation clearances
Decide on floor track
Choose colour powder coated to RAL or anodised. to Euras
Versions (seen from the interior)
Type I: Opening to the inside
Type 0 : Opening to the outside
'Number' L Number of panels opening to the left
'Number' R Number of panels opening to the right
For more information on the Technical Information,
contact our sales department.
Brockhouse Modernfold Limited is the UK
market leader in the design, manufacture and installation of acoustic
movable walls. Over many years we have developed a range of modular panel
systems capable of exceeding the most demanding of specifications.
