To download our new brochure click on the image below...
3MB Download
General Technical Information
Aluminium framed.
Performance group 'B' to DIN 18055.
The bottom track can be recessed into the floor.
10mm of height tolerance can be taken up without affecting
the soundproofing, draft seal or operation.
The panels are locked in position by means of aluminium locking
bars operated against top and bottom tracks. The travel of
these bars is 24mm. Polyamide end caps are fitted to the locking
bars to prevent metal on metal contact.
Each panel can be locked in any partly open position
Can be supplied with an integrated separately operable pass
door fitted with proprietary handles, lock and profile cylinder.
Rollers
4 wheel trolley which is universally jointed
to spread the load evenly
The trolleys are sealed heat and cold resistant
glass fibre reinforced polyamide to ensure very quiet running.
The load bearing capacity is 200kg
Glazing
Glass unit thickness from 4mm to 20mm is possible.
The glazing method is in accordance with the
general code of practice for glazing.
Replacement of the glazing at a later date
is possible without problems.
Technical Data
The construction is flush with the surface
therefore there are no protruding running or directional tracks
Can be opened to the inside or outside and
is available with a separate or attached turning panel (through
180'). Segment folding systems are possible up to an angle
of 45'. Centre pivoting panels are possible
The profiles have a very narrow visible projection
width allowing a very large percentage of glazed surface
The panel is 45mm thick allowing a maximum
panel width of 1100mm.
Up to I0mm expansion compensation that is
made possible due to wide closing rebates meaning that the
screen remains impenetrable and continues to function correctly
under hot and cold conditions
Vertical sealing is by means of a double EPDM
seal. Horizontal sealing is by means of a double brush seal
Drainage of the panels can be via a slit cut
in the glass groove according to manufacturers guidelines.
The ground sill has controlled water drainage to the outside
due to the slanting profile formation
Planning Guide
System
Unbroken Aluminium profile system
Unit thickness of 45mm
Performance Group 'B'
Top hung
Panels
Choose the number of panels.
Panel sizes are dependant on the type of glass and their
width and height. If necessary, the number of panels
must be increased.
Choose colour powder coated to RAL or anodised to Euras
Frame
Decide on the external frame dimensions in relation
to to the structural opening, making provision for any
necessary installation clearances
Decide on floor track
Choose colour powder coated to RAL or anodised. to Euras
Versions (seen from the interior)
Type I: Opening to the inside
Type 0 : Opening to the outside
'Number' L Number of panels opening to the left
'Number' R Number of panels opening to the right
For more information on the Technical Information,
contact our sales department.
Brockhouse Modernfold Limited is the UK
market leader in the design, manufacture and installation of acoustic
movable walls. Over many years we have developed a range of modular panel
systems capable of exceeding the most demanding of specifications.
